Body
- Step 1 Press the Message button.
- Step 2 Enter a PIN (password). (Default PIN 14253)
- Step 3 Please follow system instructions for the following:
- Record your name
- Record your greeting
- Set up a new PIN (password) (4 digits or more)
- When asked about the directory setup, press # to continue
- WAIT until you hear “You Have Finished Enrollment” then hang up
Back to top ^
- Step 1 Dial 909-632-1071
- Step 2 Press the * when you hear the greeting.
- Step 3 Enter your 4-digit extension and press #
- Step 4 Enter the (Default PIN 14253)
- Step 5 Please follow system instructions for the following:
- Record your name
- Record your greeting
- Set up a new PIN (password) (4 digits or more)
- When asked about the directory setup, press # to continue
- WAIT until you hear “You Have Finished Enrollment” then hang up
Back to top ^
- Step 1 Press the Message button and log on.
- Step 2 Press 1 to hear new messages or press 3 to review old messages.
- Step 3 Use the following keys to manage your messages and to control playback.
Back to top ^
- Step 1 Dial 909-469-5399
- Step 2 When the greeting begins to play, Press *
- Step 3 Enter your ID (4-digit extension or mailbox number), then press #.
- Step 4 Enter your PIN (password) then press #
OR
Back to top ^
- Step 1 After listening to the message, press 4
- Step 2 Record your reply
- Step 3 Press # to send the reply or press 1 for message options
- Message Options are the same as above
- Step 4 Follow the Cisco Unity conversation to handle the original message
Back to top ^
- Step 1 After listening to the message, press 5
- Step 2 Follow the Cisco Unity conversation to address the forwarded message
- Step 3 Press # to forward the message as is, or press 2 to record an introduction, or press 3 for message options
- Step 4 Press # to forward the message as is or press 1 for message options
- Message Options are the same as above
Back to top ^
Use these keys anytime during any changes
- * Cancel or Back Up
- # Skip or Move Ahead
| Number Key |
Description |
| 1 |
Repeat |
| 7 |
Skip Back |
| 2 |
Save |
| 9 |
Message Properties |
| 3 |
Delete |
| 8 |
Mark this message urgent |
| 4 |
Reply |
| * |
Cancel Message Playback |
| 5 |
Forward Message |
| 0 |
Help |
Back to top ^
| Number Key |
Description |
| 1 |
Repeat |
| 6 |
Mark New |
| 2 |
Save |
| 7 |
Skip Back |
| 3 |
Delete |
| 9 |
Message Properties |
| 4 |
Reply |
| * |
Cancel Message Playback |
| 5 |
Forward Message |
| 0 |
Help |
Back to top ^
- Step 1 Press the Message button and log on with with current ID and PIN
- Step 2 Press 4 > 3 > 1
- Step 3 Enter a new PIN (password) and press #
- Step 4 Enter the new PIN (password) again to confirm it and press #
Back to top ^
- Step 1 Press the Message button and log on with with current ID and PIN
- Step 2 Press 4 > 3 > 2
- Step 3 At the tone, record your name, press # to end recording or press * to keep the current recording.
Back to top ^
- Step 1 Press the Message button and log on with with current ID and PIN
- Step 2 Press 4 > 1 > 1
- Step 3 After Cisco Unity plays your current greeting, press 1 to re-record it, or press 3 to record a different greeting, choose the greeting, and then rerecord it.
Back to top ^
(You can enable or disable only your alternate greeting by phone.)
- Step 1 Press the Message button and log on with with current ID and PIN
- Step 2 Press 4 > 1 > 1
- Step 3 After Cisco Unity plays your current greeting, press 2 to enable or disable your alternate greeting.
- Note: When your alternate greeting is enabled, it overrides all other greetings.
Back to top ^